- Digital Subscriber Loop Test Set
T336B Test Set with digital display provides the user with the capabilities to measure LOOP & GROUND CURRENT, CIRCUIT LOSS, CIRCUIT NOISE and POWER INFLUENCE
|
- Circuit Termination Set
T279 Termination Set provides the termination and balance arrangements required for sectionalizing noise measurements on a circuit
|
- Basic Subscriber Loop Test Set
T136 Series Test Sets with analog display provides the user with the capabilities to measure LOOP & GROUND CURRENT, CIRCUIT LOSS, CIRCUIT NOISE and POWER INFLUENCE
|
- Bond Current Meter
T304B current meter and T305 current probe make an ideal pair for measuring cable shield currents without disrupting or disconnecting cable shield connections
|
- Cable Shield Splice Test Set
T124 provides accurate measurements on the conditions existing at cable shield splices, and checks the integrity of ground connections
|
- Longitudinal Balance Test Set
T207 is designed to measure the longitudinal balanace of single-port or two-port circuits and devices
|
- Artificial Cable Kit
T240 cable kit provides line sections which closely represent actual telephone cable sections
|
- Digital Signal Detector
D550 Shark is a non-intrusive probe for detecting digital signals such as T1 on copper cable pairs
|
- Digital Clamp-on Probe
D560 clamp-on probe provides non-metallic, non-intrusive access to T1 carrier span lines. When used with a T1 test set the user can perform tests as though tied directly to the copper wire
|
- Universal Test Line Responder
2056 combines the test and measurement capabilities required by most network testing systems
|
- Multi-frequency Tone Generator
T166B is useful in making one-way transmission measurments where it is necessary to evaluate the frequency response chracteristics of the line under test
|
- Combined Test Line
T164-02 provides a stable 1010 Hz refernce tone and a quite termination for making one-way transmission and noise measurements
|
